Power Plants Industry

Power Plants Industry

Xinhui Valve is a Chinese supplier of power station valves. We produce high temperature and high pressure power station valves and all valves related to power stations. If you are a Power Plants Industry and want to know about our power station valves please contact us!

Send Inquiry Now

why choose newinteg valve ！

Our wish is to get you here without having to look for anyone else!

Power Plants Industry
3

Full range of valve types​

We have hundreds of industrial valves for you to choose from！

6

Novel valve type

Every year research and development of novel valves are put into production!

3

Customized valve types​

Fully customized valve according to customer needs!

You Need to Know About Valve Power Plants Industry！

tall ad 001
tall ad 001

Power Plants Industry

Classification of main valves and advice for their purchase in thermoelectric power plants
1
Main valve for thermal energy production closed
The main valves for closed thermal power generation include:
  • Globe valve / electric globe valve: is installed on the water and steam piping as an opening and closing device.
  • Electric gate / gate: is installed on the water and steam pipes as an opening and closing device.
  • The three-way valve is installed between the pressure gauge and the pressure gauge elbow for the pressure gauge.
  • Purge valve / electric purge valve: is installed in the lower header of the water-cooled boiler wall of the power plant and in the centralized downcomer as a boiler purge device.
  • Check valve: is installed on the steam and water piping as an installation device to automatically prevent backflow of fluid. Part of the function of a check valve can be classified as safety protection.
  • Steam trap: is installed in the drain piping and its function is to drain the condensate water, prevent or reduce the purge and rapid cooling of the equipment by the two-phase vapor-liquid flow and cause damage and vibration.
  • Water pressure test block valve: is installed on the steam pipes at the outlet of the boiler superheater and at the inlet and outlet of the heater as an isolation device when the system is subjected to a pressure test of the boiler water. The locking plate can be reinstalled for repeated use during the next water pressure.
2
Main valves for controlling the production of thermal energy
In the domestic electricity industry, it is customary to refer to the device that regulates the water flow rate and pressure as a “regulating valve” called “relief valve” or “control valve”, which is divided into relief valve pressure valve and pneumatic pressure relief valve which are installed in the system of:
  • Reduction of boiler temperature and pressure
  • Soot blowing
  • Heating the oil line
Aair preheatingIn the thermal system of thermal power plants, the bypass system of the steam turbine mainly consists of a regulating valve and a control device. In this system, the connection type, function selection and capacity have a great impact on the operation of the unit.
High pressure bypass system valves generally include valves for:
  • desuperheating
  • pressure reduction
  • water splash isolation
  • regulation of water sprays Low pressure bypass system valves generally include valves for:
  • temperature reduction
  • pressure reduction
  • regulation of water sprays
3
Main valves for the production of thermal energy for safety protection
The safety valve is the most common protection valve. Its function is to automatically discharge steam when the pressure exceeds the specified value to prevent the pressure from continuing to rise, in order to ensure the safety of the boiler and the steam turbine.
It is mainly installed in:
  • boiler drum
  • super-heater output
  • heater outlet
  • deaerator
  • top and bottom steam water side of the power plant boiler
  • industrial steam extraction pipeline
  • steam turbine heating pipeline
The electromagnetic vent valve is a protection device that prevents the steam pressure in the boiler from exceeding the specified value. It’s opened before the safety valve is activated to discharge excess steam to protect the normal operation of the boiler at the specified pressure. At the same time, the number of actions of the safety valve is reduced and the life of the safety valve is extended.
The inlet valve, (such as high addition valve, high addition valve or high addition three way valve), and the high pressure heater check valve are installed at the inlet and outlet of the high pressure heater respectively. These two valves are used together when the high pressure heater crashes, the inlet valve closes the high pressure heater inlet and the check valve closes the high pressure heater outlet. The feed water enters the boiler through the bypass, and the high-pressure heater stops working at this time. , so as to decompose the high pressure heater to ensure the normal water supply of the boiler. The pneumatic quick start valve is used in the oil, water and steam boiler system as a device for automatic and rapid fluid cutting.
The circulator outlet valve is installed at the boiler circulator outlet. The shut-off valve is installed on the superheater and post-heater water spray pipes and is used as a quick opening and closing device. These types of valves can be classified as safety protection or closure. Among them, pneumatic quick opening valves and locking valves have quick closing or opening characteristics.
The pressure relief valve is a device that prevents the fluid pressure in the equipment from rising beyond the permissible value and ensures the safe operation of the equipment.
The steam extraction check valve is used in steam extraction and heating systems of steam turbines to prevent the pressure in the steam turbine from being suddenly reduced when the steam turbine unit is suddenly losing load and steam in the steam extraction tube and each heater flows back into the steam turbine, causing the steam turbine blades to break. 

More Valve related articles
18 November 2022
What are types of valve end connections?
09 December 2022
Valve casting manufacturers
26 November 2022
Valve sealing surface material selection guide
07 November 2022
Valve codes and standards
09 November 2022
Valve function in piping
04 October 2022
Gate valve types
30 December 2022
GB standard china
04 October 2022
Gate valve pipe
04 November 2022
Valve type
07 December 2022
valve manufacturing process flow
23 December 2022
What is the API and ISO standard?
05 January 2023
What is the German Standard?
10 December 2022
Valve casting process
06 January 2023
The material for high temperature industrial valve
04 October 2022
Functions of control valves
17 November 2022
Valve end connection
29 November 2022
Nominal pressure vs. working pressure
15 December 2022
Why are valves manufactured using a forging process?
04 October 2022
Globe valve types
22 November 2022
What are the parts of a valve?
I believe you will not regret your choice​

Why choose XinHui valve?​

Customized on demand​

We very much welcome customers to bring your requirements in the industry, our industrial valve solutions include customized on demand! Use the best materials to produce standard compliant valves, If you need valve customization services, please contact us immediately

Valve quality​

Xinhui valve strictly controls the quality of the products in each process; on the other hand, it improves the work quality of the employees; and constantly pursues the high performance and high quality of the products, and is committed to becoming the preferred brand of valve products for the majority of users. . ​

Professional Services

Our salesman will answer your professional industry questions, product questions, transportation questions, etc. Our service personnel are online 7*12 hours. If you encounter time difference problems, please wait patiently for our reply, and we will reply you as soon as possible The problem.​

High and new technology​

As a high-tech enterprise in China, we can provide complete valve sample drawings, technical support for valve production process, technical support such as maintenance manuals, and strength calculation books. Frequently Asked Questions about Valve Operation.

R&D innovation​

Xinhui Valve has invested a lot of manpower and funds in the innovative research and development of valves, and opened laboratories, inspection rooms, and R&D rooms. 20 kinds of new products are developed every year. Customized industry-specific valves for customers, dozens of products under severe valve conditions.


International Standard

The valves we produce meet various international testing indicators, and all kinds of valves are manufactured and accepted according to relevant domestic standards such as GB and JB, as well as international standards such as ANSI, API, JIS, and BS. DIN. Please contact us for special production standards.​

Send Inquiry Now

We are not only a manufacturer of valves, but also a disseminator of industry knowledge

REQUEST A QUOTE FOR MORE DETAILS
EXPLORE STORY

OEM & ODM XinHui valve Applications

D341H国标法兰式蝶阀Butterfly valve

xxxxxx炼金最佳

单击 “编辑” 按钮更改此文本。这是测试文本。

 

x

Get an Instant Quote
Send Your Inquiry Now
D341H国标法兰式蝶阀Butterfly valve

xxxxxx石油专用....

单击 “编辑” 按钮更改此文本。这是测试文本。

 

x

Get an Instant Quote
Send Your Inquiry Now
D341H国标法兰式蝶阀Butterfly valve

xxxxxx

单击 “编辑” 按钮更改此文本。这是测试文本。

 

x

Get an Instant Quote
Send Your Inquiry Now
D341H国标法兰式蝶阀Butterfly valve

xxxxxx

单击 “编辑” 按钮更改此文本。这是测试文本。

 

x

Get an Instant Quote
Send Your Inquiry Now
D341H国标法兰式蝶阀Butterfly valve

xxxxxx

单击 “编辑” 按钮更改此文本。这是测试文本。

 

x

Get an Instant Quote
Send Your Inquiry Now

want to talk
with us?

Leave your details and one of our experts will contact you!

Scroll to Top

Contact us

Please fill out this form with a brief description of your issue and we will get back to you as soon as possible.