How are valves connected?

Valve connection type

Valves help keep high pressure contained and keep your work area safe. By choosing the wrong valve connection types can result in danger. Pipes and valve connections are of very much importance. The connection work is carried out carefully so as not to cause damage and leak after connecting the valve. A valve is not operated if it is not connected to the pipe. It helps in forming the pipeline system.

How are valves connected?

Valves are sometimes classified according to the end connection configurations. Three basic configurations are explained here by threaded connection, welded connections and flanged connections. To maximize your safety, users must familiarize themselves with different connection types that are available:

1.   Threaded

Threaded valve end connections are very common in low pressure and in piping systems. These are easy and quick to assemble. They form very tight and good connections between valves and pipes. There are valves that are male and female threaded connections. There are more few standards that exist. The valves and pipes both are created using the same standard to make the proper connection.

2.   Flanged

Most flanged end connections are very useful for industry standards. These kinds of standards define the specific criteria met in order to facilitate the product use.

3.   Welded

This type of valve simply has the socket with its inner diameter. It is slightly larger than the pipe’s outer diameter.  These are also called socket welds. These are usually reserved for smaller sizes. They are permanent connections and they are leak free as well. Heat sink fins should be used more to protect seals during welding. There are 2 main types of welded connections:

4.   Butt weld

In this welding connection the pipe and the valve ends are butted. They are butted to each other and then they are welded to create a link. These butt weld connections are very common with steel valves. They are ideal for all types of valves due to size.

5.   Socket weld

The welded end of the valve is shaped into the socket. The pipe is inserted for welding. The connection uses filet welds so that it is linked into 2 components.

6.   Compression

This type of connection is found mainly on water lines in plumbing. They don’t need heat like other valve end connection needs. The connection uses two pieces in addition to the pipe and valve. They are the ferrule and compression nut.

7.   Manifold mount

Manifold mount valve end connections incorporate the flat face with o rings around the ports. The ports on the valve are aligned with the ports on the components. Bolts are used to hold the valve in place of the mating surface on which it is mounted.

8.   Union

Union connections have the threaded nut that is needed for a male valve end connection. Mostly union connections need another type like glue, welded, threaded onto the valves. Once installed union connections can easily be removed from the pipes that are using this type connection.

Share:

leo
leo
Hi! I'm Leo, I'm a professional writer for XinHui valve, I'm responsible for writing articles on the entire website. This is not only my daily job, but also the manager of the export sales team. When you have questions about the order, I will answer your doubts for a very reason. You can leave your question and email address, and I will contact you as soon as possible!

Leave a Comment

Your email address will not be published. Required fields are marked *

Social Media

Facebook-f Youtube Twitter Instagram
Get The Latest Updates

Subscribe To Our Weekly Newsletter

No spam, notifications only about new products, updates.
Categories

Most Popular

Related Posts

want totalk
with us?

Leave your details and one of our experts will contact you!

Scroll to Top